This corrosion resistant product is made by the compliance ground rod Suppliers

Lightning is very abrupt and unpredictable calamity that it can fall over any high or low rise buildings as well as trees without any proclamation.How to Rescue Your Buildings from Lightning Disaster?We are offering an advanced method of lightning protection system i. According to the local mayor, Habitegeko Francois victims died at the spot, whereas 140 people were taken to the nearest hospitals and health centers.e. Due to lack of awareness of available lightning protection system, these lightning prone areas are undeveloped. Thunderester air terminal.. It must be placed at the highest point of any structure.A down conductor is used to provide low resistance path to dissipate the lightning into the ground. This corrosion resistant product is made by the compliance ground rod Suppliers of NFC 17-102 along with EN 50164 and UNE 21:186. It ionizes its surrounding air and creates a channel of relatively high conductivity between cloud and ground to provide a preferential path for lightning. A test link is installed above 1m from the ground to provide a disconnection between the down conductor and the bare earthing conductor at the time of required maintenance. Apart from all this, we have a suitable lightning strike counter which is equipped on the down conductor above 1. Recently, a Church was struck by lightning located in the mountainous region of Nyanguru, near the southern borders. Few days ago, a similar incident was also occurred in the same area where lightning struck over a group of 18 students causing one death. In that weather accident, at least 16 deaths were recorded. The mast size is available up to 2m-8m and can offer larger area of protection up to 107m. Our Lightning Protection Manufacturers effortless Thunderester air terminal is assembled with stainless steel and hence able to withstand in extreme environmental condition. An insulator made up of DMC is mounted over the mast before mounting the thunderester. It can be installed by mounting a mast of appropriate height on the concrete base. Connect the down conductor to the insulator, so that the electricity passes to ground through the down conductor, without touching the building.5m from the ground which measures and records every single strike with date and time