Great Balance from the Best Rifle Scopes

A riflescope as a pure magnifying glass, however, worthless, it is a marker needed as a targeting aid. Colloquially, the term "crosshair" has prevailed, expertly this is referred to as "reticle". "Reticle" is the type of "reticule". This mark may be a normal cross that was actually made earlier from threads. Today, these are usually etched on lenses or glass plates. In addition to the classic crosshairs, there are also those that are tapered at the intersections or interrupted or with a dot or plus sign in the middle. In addition, a kind of "T" in use, here is missing the upper vertical part of the cross. Different types are also available for this type of reticule. The simplest kind is the "circle reticle", here is in the middle of the optics a circle. Visit this link where some riflescopes offer the option to switch on a light spot in the middle. Mil dot Reticle To estimate the distance, there are tools for various riflescopes: In the "Mil dot Reticle" are located on the axes of the cross or Ts markings at exactly the same intervals. Knowing the size of the target, these marks can be used to determine the distance and the scope can be adjusted accordingly. For the adjustment of the rifle scope, snipers and hunters use tables. In other riflescopes a "scale" is incorporated; If an object fits exactly between this scale, you have the distance. This scale consists of a straight line over which there is a parabolic curve. The Mil dot reticle, however, is considered more accurate. A riflescope must be shot at a weapon, usually at a distance of 100m. Some prefer a distance of 150 m to take high and low shot without adjusting the ZF. At some point, as the distance increases, the horizontal and vertical planes must be adjusted accordingly to precisely hit the target. The aiming accuracy is influenced by the following parameters: caliber used, length of run, propellant charge, weight of the projectile and its aerodynamics, specific trajectory (shot parabola and spin). Environmental factors such as wind, air pressure / air density also play a role in increasing distance. So it's not like being a precision rifleman with a rifle and riflescope: it takes a lot of practice to be able to fight targets at longer distances. Simply landing a hit at 500 m or above is like playing a lottery game with the appropriate odds on an inexperienced shooter. Please note also when using a riflescope: Between eye and riflescope distance should be maintained, one is too close, a riflescope can definitely lead to injuries to the nose or eyes or even dance a lid. Therefore, scopes are usually designed so that the exit pupil is at 8 - 10 cm, which corresponds to the distance eye - eyepiece. Only then you set the "crosshairs", this should be sharp Sharp to see, and a slight circle shadow recognizable. Already at the assembly this is to be considered. The attachment of a riflescope is therefore already a very individual matter. The finder of a rifle with ZF does not have to deal with this weapon automatically. Here, readjustment is required. One will not get around adjusting the rifle scope on him, if necessary, even to re-assemble and then shoot the weapon accordingly.